Finishes:Chrome
Model #:1993LF
-
Product Features & Benefits
-
Features & Benefits:
- Fits 1-hole installations
- Optional escutcheon available for 3-hole installations (purchase separately)
- ADA Compliant
- Standard spout swivels 120degrees
- 2.5 in. maximum deck installation thickness
- Lifetime Faucet and Finish Warranty ›
-
Technical Details:
- Number of Handles: 1
- Tall/High-Arc: No
- Pull-out/Pull-down: No
- With Side Sprayer: No
- With Soap/Lotion Dispenser: No
- Aerator Type: Laminar
- Valve Type: Euromotion Ceramic Cartridge
- Flow Rate: 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa
- Holes/Width: 1 or 3-hole 4″ installation
- Spout Length: 6″
- Spout Total Height: 12″
- Spout Height Deck to Aerator: 12″
-
Smart Features:
- ADA Compliant
- SmartFit™ Supply Line
-
Features & Benefits:
-
Cleaning & Care
-
Can drain openers cause damage to finishes?
In most cases, the finish is safe if you follow the manufacturer’s instructions for use and make sure the drain cleaner isn’t left on the finish for longer than 30 minutes.
-
How should I clean or maintain the finish on my faucet?
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use.
Avoid using the following which can damage your finish:
- Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner.
- Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
- Avoid harsh abrasives or polishes
- Avoid bleach-based cleaners
-
What cleaning products can cause damage to finishes?
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use.
Avoid using the following which can damage your finish:
- Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner.
- Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
- Avoid harsh abrasives or polishes
- Avoid bleach-based cleaners
-
How can I remove mineral deposits from my aerator?
- Remove the aerator. Soak it in vinegar overnight, then flush with water.
- For stubborn deposits, rub with a toothbrush.
-
The finish on the drain plug for my metal pop-up assembly is tarnishing, what should I do?
For all Metal Pop-Up assemblies manufactured after 1997 you will have to replace the drain flange and stopper. The part number for the stopper is RP5648. You would then attach the appropriate finish suffix to the part number. With no suffix the part will be chrome. The drain flange part number is RP23060. The flange unscrews from the rest of the pop up assembly. For all Metal Pop-Up assemblies manufactured before 1997 you may need to replace the entire pop-up assembly. The stopper is still available and is a part number RP5648. The drain flange was a part number RP6126. The chrome drain flange is still available but the other finishes are not. If you have another finish you will have to replace the entire drain assembly.
-
Can drain openers cause damage to finishes?
-
Support & Repair Parts
IMPORTANT: If your device does not have a PDF viewer, you will need to visit your phone's manufacturer's website to download a PDF viewing app first.
- Coordinating Items