Finishes:Chrome
Add Optional Soap Dispenser
Note: Soap dispenser requires an additional hole.
Model #:T4774
-
Product Features & Benefits
-
Features & Benefits:
- H2Okinetic Hand Shower sculpts water into a unique wave pattern, forming a powerful drench spray
- Gives you the feeling of more water without using more water
- Coordinating hand shower included
- Soft, rubber Touch-Clean spray holes allow you to easily wipe away calcium and lime build-up from the spray face of your shower head and hand shower with the touch of a finger
- Spray settings include: H2OKinetic spray
- H2Okinetic spray creates a shower with more warmth, coverage and intensity
- ADA Compliant
- Trim kit only, must purchase rough-in R4707 separately to complete the unit
- Alternative rough options: R4707-PX (pex crimp applications), R4707-MF (memory fitting/cold expansion applications)
- Hand shower includes double check valves for backflow protection
- 4-hole 8-16″ installation
- Rigid slip-on diverter spout
- Rigid slip-on diverter spout
- Lifetime Faucet and Finish Warranty ›
-
Technical Details:
- Valve Type: Ceramic valve
- Flow Rate: 1.75 gpm @ 80 psi, 6.6 L/min @ 550 kPa
- Gallons Per Flush: NA
-
Smart Features:
- ADA Compliant
- H2Okinetic™ Technology
- Touch Clean®
-
Features & Benefits:
-
Cleaning & Care
-
Can drain openers cause damage to finishes?
In most cases, the finish is safe if you follow the manufacturer’s instructions for use and make sure the drain cleaner isn’t left on the finish for longer than 30 minutes.
-
How should I clean or maintain the finish on my faucet?
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use.
Avoid using the following which can damage your finish:
- Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner.
- Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
- Avoid harsh abrasives or polishes
- Avoid bleach-based cleaners
-
What cleaning products can cause damage to finishes?
Always blot dry any water from faucet surface. Allowing water to evaporate on the surface can lead to build up of mineral deposits. Cleaning with a damp non-abrasive sponge and buffing it dry with a clean soft cloth should help keep your product looking beautiful. To remove water spots, use warm water and a soft, damp cloth. Hard water stains may be removed using a 50/50 solution of white vinegar and water. Make certain that you rinse thoroughly with water afterward.
If additional cleaning is required, all of our finishes may be cleaned with the following household cleaners: Fantastik® All Purpose Cleaner, or Windex® Original Glass Cleaner, when used according to the manufacturers' instructions for use.
Avoid using the following which can damage your finish:
- Avoid industrial cleaners and abrasive cleaners, such as those used for toilet bowls, green Scotch-Brite heavy duty scrub sponges, Scrubbing Bubbles Bathroom Cleaner and Lysol Basin Tub, Soft Scrub, and Tile Cleaner.
- Avoid products that state on the label that they remove tarnish and rust, and those containing hydrofluoric, hydrochloric and/or phosphoric acids and caustic agents.
- Avoid harsh abrasives or polishes
- Avoid bleach-based cleaners
-
What is a Brilliance® finish?
Brilliance® finishes, designed to not corrode, tarnish or discolour for a “like-new” look for life, are developed by embedding molecules deep into the faucet’s surface, creating a bond that is virtually indestructible. This process is known as Physical Vapor Deposition (PVD). Delta was the first manufacturer to offer this patented process that creates a bond that's virtually indestructible with an incredibly reflective shine. Brilliance resists abrasions and discolouration better than traditional special finishes and, in many cases, better than chrome. In independent tests using the harshest drain cleaners, the Delta Brilliance drain retained its appearance, while its competitors did not come close. Tested with over 100 household cleaners, the abrasion resistance of the Brilliance finish can even withstand repeated scouring with steel wool. A Brilliance finish is guaranteed not to corrode, tarnish or discolour for as long as you own your home. It can even withstand prolonged exposure to harsh coastal environments.
-
The finish on the drain plug for my metal pop-up assembly is tarnishing, what should I do?
For all Metal Pop-Up assemblies manufactured after 1997 you will have to replace the drain flange and stopper. The part number for the stopper is RP5648. You would then attach the appropriate finish suffix to the part number. With no suffix the part will be chrome. The drain flange part number is RP23060. The flange unscrews from the rest of the pop up assembly. For all Metal Pop-Up assemblies manufactured before 1997 you may need to replace the entire pop-up assembly. The stopper is still available and is a part number RP5648. The drain flange was a part number RP6126. The chrome drain flange is still available but the other finishes are not. If you have another finish you will have to replace the entire drain assembly.
-
How do I remove my tub drain stopper for cleaning?
There are two types of tub drain stoppers - lift & turn and toe tap.
-
Lift and Turn
The lift & turn stopper for the bathtub unscrews counterclockwise while in the full up position.
-
Toe Tap
The toe tap stopper also unscrews counterclockwise while in the full up position. However, the cap may unscrew from the plunger assembly before the entire stopper comes out. In that case, there is a nut that will be exposed and can be used to unscrew the plunger assembly from the drain.
If either of these is "spinning" without unscrewing, the threads are stripped and you would need to exert upward pressure while unscrewing in hopes of uncoupling this from the bath waste. If that doesn't work you would have to unscrew the bath waste flange from the drain pipe. This will require access under the tub.
-
-
Can drain openers cause damage to finishes?
-
Support & Repair Parts
IMPORTANT: If your device does not have a PDF viewer, you will need to visit your phone's manufacturer's website to download a PDF viewing app first.
- Coordinating Items